New Watson Marlow 313 Peristaltic Pump Heads, 3-Roller Pumphead 8MM 133.3421.H24

Description

4292SF1E.74
New Watson Marlow 300 Series / Model 313 Rapid Load Peristaltic Pump Heads, 3-Roller Pumpheads (16 MM Rollers), Part Number 133.3421.H24, or 133-3421-H24, or 1333421H24.  Each bid quantity is for One (1) Pumphead and Mounting Plate with Factory Literature and Three (3) Mounting Screws.  You may bid / buy any number, up to the total quantity available above.
These were purchased at an unclaimed freight sale earlier this year, and they are new in the original plastic Ziplok bags.  Although we didn't check them individually, there could be an occasional light scratch from being handled in bulk with the screws packaged together with the pumpheads.  Also, the mounting plate appears to have holes for four screws, but there are only three screws included with each unit.  However, we are not experts, and that's how the manufacturer shipped them.  The label on the pumphead shows as follows:
133.3421.H24 11/2019 Issue: 3 313 PUMPHEAD 8.0 x 1.8 WT 16.00 DIA Rollers
The best we can gather from the label, these probably use 8MM inside diameter tubing with a 1.8MM wall thickness (please verify).  That would seem to make them suitable for higher flow volumes at lower pressure, but please make sure before attaching one to your sick grandmother's IV.  We never found a datasheet for this exact part number, but the following general information (generally) applies to the 313 Series:
According to the manufacturer
:
313 rapid load pumpheads, three rollers
FEATURES
- Rapid and simple tube loading flip-top pumphead
- Three roller rotor for high flow performance
- Up to 2000 ml/min continuous flow
- Up to 3000 ml/min intermittent flow
- Accepts 2.4mm wall tubing for higher pressure applications
- Snap-fit 313X extension pumpheads available
- Range of pumpheads available to be mounted on Watson-Marlow 300 series OEM drives or user’s own drive