Montavue MAS08P096 PoE+ 8-Port/ 8-Channel Switch for IP Cameras

Description

8-Channel PoE+ Switch for your Surveillance System
You can expand your network security system with this impressive high-speed 8-channel/port PoE+ switch. This PoE
switch
powers and transmits data from your cameras just like your NVR does, but it offers you further distance and flexibility when installing your surveillance system from
Montavue
. With a switch you don’t always have to run cables all the way back to your NVR, instead, you can put the NVR on one end of your building and switch on another. Plug the switch into the router with one single cable, and then run all the cameras on that one side of the building to the switch and the other half to the NVR.
30W PoE+ Switch – Enough power for even your PTZ Cameras
Most standard IP PoE cameras take only around 6 watts to power them, but some IP cameras such as Pan-Tilt-Zoom cameras need additional power to operate as they have more features. For PTZ cameras you need this PoE+ switch, which provides up to 30-watts of power, rather than traditional PoE switches that provide 15-watts of power. This PoE+ switch is equipped to power up to a total of 96 watts.
Ability to run your cable up to 600ft
This PoE switch with your router will help you simplify your installation and extend your wiring beyond the 300ft allowed directly from the NVR. Using this PoE+ switch you can expand the distance you can run your cable. You connect your PoE switch to your router using up to 300ft cable and then from your router to your NVR using another 300ft cable giving you a total distance of 600ft. The switch is acting as a power booster in between, as power is lost as the cable gets longer.